Zigbee 3.0 USB Dongle Plus–ZBDongle-E

73.00 د.إ

SKU: Zigbee3.0 USB Dongle
Availability: Out of Stock
  • Pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3 out of box
  • Support smart home platforms like Home Assistant, openHAB, Zigbee2MQTT and so on
  • Based on EFR32MG21
  • +20dBm output gain
  • Aluminum housing effectively reduces signal interference from peripherals
  • Optional 1.5m USB extension cable for better signal range

Out of stock

SONOFF ZBDongle-E is a universal Zigbee USB stick. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices, so you don’t need to invest in different brands’ Zigbee hubs, all you need is a universal gateway – ZBDongle-E!

The dongle plus has a wide range of supported devices,

SONOFF ZBDongle-E is a universal Zigbee USB stick. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices, so you don’t need to invest in different brands’ Zigbee hubs, all you need is a universal gateway – ZBDongle-E!

The dongle plus has a wide range of supported devices, such as ZBMINI-L, SNZB01, SNZB02, SNZB03, SNZB04, S26R2ZB, S40 LITE ZB. Dongle Plus is pre-flashed with coordinator firmware, you can also flash router firmware to extend the network range.

Dongle Plus support a variety of common systems, like Linux, Ubuntu, Raspbian, Windows, macOS (Windows and macOS require corresponding driver installation).

Raspberry Pi (Linux) is recommended, if you use Windows or macOS, you need to install Driver first.

Windows: CH343SER

macOS: ch34xser_macos-main

SONOFF ZBDongle-E is a universal Zigbee USB stick. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices, so you don’t need to invest in different brands’ Zigbee hubs, all you need is a universal gateway – ZBDongle-E!

The dongle plus has a wide range of supported devices, such as ZBMINI-L, SNZB01, SNZB02, SNZB03, SNZB04, S26R2ZB, S40 LITE ZB. Dongle Plus is pre-flashed with coordinator firmware, you can also flash router firmware to extend the network range.

Dongle Plus support a variety of common systems, like Linux, Ubuntu, Raspbian, Windows, macOS (Windows and macOS require corresponding driver installation).

Raspberry Pi (Linux) is recommended, if you use Windows or macOS, you need to install Driver first.

Windows: CH343SER

macOS: ch34xser_macos-mainin

There are no reviews yet.

Be the first to review “Zigbee 3.0 USB Dongle Plus–ZBDongle-E”

Your email address will not be published. Required fields are marked *